FC5-71 Hokuyo
Sensors for Textile Industry
Sensor for detecting sliver breakage(for Carding machine)
Preventing the malfunctions by temporary slack
This is U-shape sensor which is consisting of projector, receiver and amplifier in one body. This is mounted in the entrance of the coiler and detects coiler blockage or sliver breakage.
Feature
・Easy handling
・Special timer for preventing malfunctions by temporary slack is incorporated.
・Relay output(1a relay).
・Compatible with FC5-61.
Application
・Coiler blockage/ Sliver breakage
・This sensor detects coiler blockage and sliver breakage.
Specifications
|
Kind
|
Through-beam type
|
|
Model No.
|
FC5-71
|
|
Light source
|
Infra-red LED
|
|
Power source
|
AC12 to 24V ±10％ 50/60Hz
|
|
Power consumption
|
1VA or less(at 12VAC), 3VA or less(at 24VAC)
|
|
Distance between projector and receiver
|
50mm(fixed)
|
|
Detectable objects
|
Sliver withφ10mm or more(opaque objects)
|
|
Response time
|
Executed after 5sec(interrupting state) and 1sec(light-entering state)
|
|
Operating mode
|
Light-ON*
|
|
Control output
|
1a relay(125VAC 0.5A cosφ＝1), single-shot output for 1sec.
|
|
Indicators
|
RDY lamp
|
|
Connection
|
Cable type(3.5m long, 0.3mm2)
|
|
Ambient illuminance
|
Incandescent lamp : 10,000lx or less
|
|
Ambient temperature/humidity
|
-10 degrees C to +50 degrees C, 45 to 85％RH
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 50Hz, Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
198m/s2, Each 3 time in X, Y and Z directions
|
|
Protective structure
|
IP52(IEC standard)
|
|
Case materials
|
Case : PBT resin
|
|
Weight
|
Approx. 200g
|
*After the beam is interrupted completely by sliver for 5sec., if complete light-entering is for 1sec or more, it operates.
External dimension
Caution items Make sure t o make a single wiring basically because if making a wiring with power line etc., it ma y be affected by noise.
If extending the cable, use cabtyre cable with 0.3mm2 o r more and length should b e 100m o r less.
If using commercial switching regulator as power source, make sure t o earth FG(frame ground terminal) and G(ground terminal).
Connection
