O2 IN-Situ Analyzer OXITEC Series

OXITEC5000 Standard Type

General Information
Technical Information
Docs
Other Features
Product Video

OXITEC5000 Standard Type
Gas temperature Max. 1400℃ analyzable.
Probe and filter materials are selectable based on each application.
Probe lengthes are selectable from some variations.

Model	OXITEC5000/OXITEC5000 Ex　Electronic Unit
Display	LCD・LED
Indication	System error,maintenance
Measuring Range	2 measuring ranges,0-99% adjustable
Power Source	115～230VAC 50/60Hz
Power Consumption	100－200VA（400VA at start-up）
Output	0/4－20mA　max.500Ω　resistance load
Relay contact	System error,maintenance Upper limit,Lower limit RS232C,RS485,bus compatible
Contact capacity	230VAC 5A Resistance load
Temperature	-20～+55℃
Enclosure Rating	IP66

Model	OXITEC5000 Sensor	OXITEC5000 Ex Sensor
Sensitivity	Below 1ppm　O2	Below 1ppm　O2
Accuracy	±0.2%（from measured value）	±0.2%（from measured value）
Allowable Pressure	-50～+4000mbar	-50～+4000mbar
Velocity	0～50m/sec	0～50m/sec
Allowable Temperature	Around：-40～+80℃ Temperature inside the exhaust gas pipe.： Max.600℃（Standard） Max.1000℃（Heat resistant model for middle high temperature） Max.1400℃（Heat resistant model for high temperature）	Around：-40～+80℃ Temperature inside the exhaust gas pipe.： Max.500℃（Standard） Max.1400℃（Heat resistant model for high temperature）
Enclosure Rating	IP65	IP65
Probr Material	316SS Option：Hastelloy、V4A、Incoloy、Protec	316SS Option：Hastelloy、V4A、Incoloy、Protec
Responsiveness	0.5sec（about Velocity:10m/sec）	0.5sec（about Velocity:10m/sec）
Cable length	Max.150m	Max.150m

Operating Principles

The oxygen concentration in a gas is measured from the difference in the oxygen partial pressure (pressure that oxygen accounts for in the atmospheric pressure) between the reference gas in the meter body and the measured gas.

O2 IN-Situ Analyzer OXITEC Series

OXITEC5000 Standard Type

Partners