Tri-Tronics Shaft Encoder

RJ Shaft Encoder

General Information
Technical Information
Docs
Other Features
Product Video

Shaft Encoder RJ Series - Incremental Encoder
General Purpose and Environmentally Sealed

A 2.25" diameter incremental encoder with three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The enclosure is 3" long with a side connector or end connector. Many modified versions match ECCI encoders.See the RG encoder for an economical version that is not environmentally sealed.

Standard Features and Options
•  Shaft: 3/8" x 3/4" length
•  Short-Circuit, ESD, and Surge protection are available
•  CE Marked (specific models only)

MECHANICAL

Shaft dia.: 0.3745" dia. with flat
Weight:: 10 oz. (284 grams)
Maximum Speed:: 6,000 rpm
Shaft Loading:: Radial: 25lb (113kg) max.
Axial: 10lb (4.5kg) max.
Bearing Life (L10): : 36 x 10⁶/RPM = hours
Note: to allow for axial and angular misalignment, a flexible shaft coupling is recommended.
Materials:
- Case: Aluminum, anodized
- Shaft: 303 Stainless Steel
Connectors:

PINs	Enkoder² Connectör	Mating¹ Connectör
6	97-3102E14S-6P	97-3106A14S-6S
10³	97-3102E18-1P	97-3106A18-1P

1. A mating connector with cable must be purchased separately.
2. Other connectors are available.
3. Not available as side connector.

ELECTRICAL

Power Input: (specify voltage when ordering)

Supply¹ (Vdc)	R Values^2,3 (Kohms)
5	1
12 or 15	2.2
24	3.3
7 to 20 ("5R" supply voltage)	2.2
12 to 27 ("12R" supply voltage)	3.3
8 - 30 ("8-30" supply voltage)	3.3

1. Other available on special order
2. See output circuit figure 1 below
3. R is removed for open collector

Current: 50 ma max (no load)
100 ma max (hat sürücüsü)
Ripple: 2% max
Regulation: +/-5%
Reverse polarity protected (except for 5 vdc)

Operating temperature:: 0 to 70° C
Pulse Rate:: 0 to 30 kHz
Pulses per Revolution: 1 to 1200 (Specify when ordering)
Ouput Circuit (Figure 1, specify when ordering):
Current sinking NPN transistor with pull-up resistor (50 ma max)
Current sinking NPN open collector (50 ma, 30 vdc max)
Current sourcing PNP with pull-down resistor (50 ma max)
RS422 differential line driver (MC3487 device; must be ordered with 5, 5R or 8-30 Supply Voltage)