Dinamic Opacity Dust Monitor STACK602 / VIEW580 / STACK710

Click to reach us online

VIEW580 Relative Density Meter (Integral type)

VIEW580 Relative Density Meter (Integral type)
Relative particulate emission concetration monitoring to see the change of the dust concentration in the exhaust gas comparing to the reference value which is already set.
Effective for the measurement at the exit of the electric dust monitor and big duct.
No influence by adhesion on the light emitting lens or the gap of the optical axis.
Measurement range 10m Max.
With indicator box (option), alarm setting and monitoring are available.

Model

STACK602 Sensor

Housing Material

ADC(epoxy coated)

Enclosure Rating

IP65

Temperature

Ambient Temp.:-25℃~+55℃
Temperature inside the exhaust gas pipe.:
-25℃~+400℃(Standard)
-25℃~+600℃(Heat resistant model for high temperature)

Detection Distance

1m~15m

Process Connection

Flange 50A or over

Air purge

1/4 male screw
30 to 40 litres/minute.

Cable

4-wire Shield Cable 0.5sq 50Ω/km
(max.1000m Single rayout)
8-wire Shield Cable(Transmitter-Receiver)

 

Model

STACK602 Controller

Power Supply

90~260VAC 1A(50/60Hz)

Outputs

DC4~20mA
(isolated, resistance load max.500Ω)
Serial RS232C・RS485
Relay contact 1cX2(AC250V 2A)

Inputs

 

Sensor connection point

1

Resolution

< 0.01mg

Self-checks

Zero and Span checks

Memory capacity

(1 Sensor)
Short:7 days @ 1 minute
Pulse data:2 hours @ 1 second
Alarms:500 entries

Housing Material

ADC(epoxy coated)

Enclosure Rating

IP65

Display

 LCD(Bar-graph,Values,Trend screen etc)

Temperature

-25℃~+55℃

Operating Principles

The variation of light rays that pass over the duct is monitored and the ratio of the amount of light received and the variation (dynamic opacity) is calculated and detected.