ISP-A1C Seri / Paralel Veri Dönüştürücü
This device can convert serial data into parallel output or parallel input into serial data.
This device can transmit so many I/O signals with a few signal line. This device is much higher speed than usual type.
Features
• It can transmit signals with 16 points max./unit for both input and output.
• It can extend up to 128 points max. by increasing units.
• It can make a high-speed transmission with 62.5kbps.
• It can make a DIN-rail mounting with 35mm pitch.
ISP-A1C Seri / Paralel Veri Dönüştürücü
Specifications
|
Model No.
|
ISP-A1C*(Main and sub unit)
|
|
Power source
|
18 to 30VDC(ripple10% or less),100mA(except for photo-coupler interface)
|
|
Current consumption
|
Input 85mA or less, output 850mA or less
|
|
Serial interface
|
Type
|
RS-422 and RS-485
|
|
Transmission method
|
Full-duplex two-way transmission system
|
|
Transmission speed
|
62.5k/19.2k/9,600/4,800/2,400bps(Changeover)
|
|
Transmission distance
|
Host communication: 500m(Total length)
Local communication: 2mMAX. (Between stations)
|
|
Parallel interface
|
Input signal numbers
|
16 points(It can extend up to 128 points by increasing units)
|
|
Input circuit
|
Photo-coupler isolation
Input voltage: 18V to 30VDC(Using voltage is supplied from inside)
Input current: 5mA/1 point, 85mA/1 unit
|
|
Output signal numbers
|
16 points(It can extend up to 128 points by increasing units)
1 point(Alarm output)
|
|
Output circuit
|
Photo-coupler isolation
Input voltage: 18V to 30VDC(Using voltage is supplied from inside)
Input current: 50mA/1 point, 85mA/1 unit
|
|
Ambient temperature/humidity
|
-10 to +50 degrees C, 85%RH or less
|
|
Connection
|
Screw terminal for power source, connector for the others
|
|
Case
|
ABS resin(body), polycarbonate resin(cover)
|
|
Weight
|
Approx. 260g
|
* Use this device with BWF series. If CWF series, use ISP-A1C-C.