Platinum Bell

Platinum Bell Highlights

Designed to drive any motor:
Two phases stepper (in closed or open loop)
Brushless sinusoidal or trapezoidal servo motor
Two DC or voice coil motors (controlled independently by one Platinum Bell)
Two single phase servo motors (controlled independently by one Platinum Bell)
Up to 25A/100V, 9A/200V
Ultra-Fast EtherCAT Networking
Functional Safety IEC 61800-5-2 (SIL-3, Cat4 PL-e) & FSoE
Integrated Safe I/Os (2 SIL3 inputs + 2 STO hardware inputs + SIL3 break outputs)
Platinum Series HighlightsNEW
Best-In-Class servo performance
World's smallest servo technology to feature functional safety and safety over EtherCAT (FSoE)
Higher bandwidth, faster response, enhanced linearity and highest control resolutions
Ultra-efficient EtherCAT with cycling down to 100us, high synchronization with negligible jitters and near zero latency
Added feedback support: up to three simultaneously, or two absolute feedbacks
High processing power with large memory resources for better control, enhanced processing, and real time recording

Electrical Specifications

Feature	Units	1/100	2.5/100	5/100	10/100	15/100	20/100	25/100
Minimum supply voltage	VDC	12
Nominal supply voltage	VDC	85
Maximum supply voltage	VDC	95
Maximum continuous power output	W	80	200	400	800	1200	1600	2000
Efficiency at rated power (at nominal conditions)	%	> 99
Maximum output voltage		> 95% of DC bus voltage at f = 22 kHz
Control supply	VDC	1 2 to 95 VDC (up to 6 VA inc. 5 V/2 x 200 mA for Encoder)
Amplitude sinusoidal/ DC continuous current	A	1.0	2.5	5	10	15	20	25
Sinusoidal continuous RMS current limit (Ic)	A	0.7	1.8	3.5	7	10.6	14.1	17.5
Peak current limit	A	2 x Ic

Feature	Units	3/200	6/200	9/200
Minimum supply voltage	VDC	12
Nominal supply voltage	VDC	170
Maximum supply voltage	VDC	195
Maximum continuous power output	W	480	960	1450
Efficiency at rated power (at nominal conditions)	%	> 99
Maximum output voltage		> 95% of DC bus voltage at f = 22 kHz
Control supply	VDC	12 to 95 VDC (up to 6 VA inc. 5 V/2 x 200 mA for Encoder)
Amplitude sinusoidal/DC continuous current	A	3	6	9
Sinusoidal continuous RMS current limit (Ic)	A	2.1	4.2	6.3
Peak current limit	A	2 x Ic

Partners